#Installation of Open #Belt #Conveyor #Cover

View 1: Installation drawing of whole open –close type 

 

View 2: Installation drawing of half open –close type (double chip open- close type) 

 

1) installation of handle 
After overlapping the open cover and fixed cover, based on the center line of the cover, the location upward 250mm is the center line used for installing the handle (it can be adjustable according to height of the conveyor support frame). Put the handle straightly and drilling a 4－Φ5 hole, then fasten with the rivets.

2) installation of hinge 
Adjust one side of the cover up higher from the top of the Z type steel (angle iron) 5mm, inward 140mm from the front and back sides of the cover, and upward 27mm is the location of the hinge, then drill holes Φ5 and fasten with the rivet. Others holes are also fastened with the rivets. 

3) installation of the lock catch
After installing the hinge, on the other side of the cover, inward 185mm from front and back sides of the cover, then based on the bottom, upward 36mm and 77mm , drill holes Φ5 and fasten the lock with the rivet, next keeping the lock locking( clamp status), and then putting the lock nose on the Z type steel straightly and drilling hole to fasten.

4) installation of the open cover
Overlap the open cover on the bilateral fixed covers. The overlapped length should be the length of 2 pitches of waves, then put the other side of the hinge appressed on the angle iron and drill hole 4－Φ5 with the rivet fastened.

rain cover

How to Install Belt Conveyor Cover Support Frame?

 Belt conveyor cover is applicable to power plant, cement plant, mines and other major factories which is waterproof, dustproof and windproof, it plays a great role in reducing the loss during the process of conveying goods ,making the conveyor belt more safe and reliable in operation and purifying the environment .

As the main support frame of the conveyor cover, the length of Z type steel or the connection angle iron is equal to the length of the installed conveyor cover. Please weld the Z type steel or the connection angle iron on the channel steel or the little stiffening angle iron on both sides of the belt conveyor. If need the stiffening angle iron, at first, weld the stiffening angle iron on both sides of the conveyor, then weld the Z type steel or the connection angle iron on the stiffening angle iron, detailed steps are as following:
 1) first weld the little stiffening angle iron ∟40*40*100*4(just for reference, it also can be indicated by users) every 1.5m or 2 m on both sides of the belt conveyor ( eudipleural ). The height from the intermediate frame to the top of little stiffening angle iron should ≥50mm ( it also can be decided by users).
2) Then weld the Z type steel 30*50*30*(2.0~3.0),( just for reference, it also can be replace by angle iron) and fix it on both sides of the intermediate frame top, the inner size should be 10-20mm bigger than outside size of intermediate frame.
3) After being welded please remove welding slag then paint.

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

•            Tel: +86 373 579 9198
• Fax: +86 373 507 1699
• info@pkmachinery.com
• Address: 289 Yellow River Road, Xinxiang City, Henan Province, China

How to Solve Portable Belt Conveyor Belt Skid Problem

Portable belt conveyor is a lightweight continuous conveying equipment with the features of high efficiency, good mobility, and convenient usage. It not only conveys bulking material but also realize conveying bagged material, the angle and lifting height is adjustable. In our daily life of operation, we may have trouble of belt skid problem, today PK Machinery will introduce the method to solve the problem:

1.You can adjust the stroke of tension to increase the tension to solve belt skid problem for the portable conveyor which adopts screw or hydraulic tensioning . However ,if the stroke of tension is not enough, it may lead to permanent belt deformation ,and you need to cut a piece of belt off and vulcanize again. 

2.If you require long stroke of tension when using nylon or EP belt, you can also vulcanize the belt or increase the stroke of tension to solve belt skip problem.  

Sidewall Belt Conveyor Introduction

Does it suitable for your company? SidewallBelt Conveyor is a continuous transporting equipment of loose bulk materials such as coke, coal, limestone, sand and gravel. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle.

It can be used in coal, ore, wood-chip, steel, ship, sand, silo and other fields. Long service time, lower power consumption, quick installation and quiet running are the advantages of it.

添加图片说明

The sidewall increases the carrying capacity of the belt and prevents product from falling off the edges of the belt. Hot vulcanization provides a 5x greater adhesion between the belt and sidewall, eliminating the need for bolting the sidewall to the base belt. Greater adhesion also prevents the sidewall from lifting and separating from the base belt, extending the belt life.

►Features
   1.Long service life
   2.Reduced maintenance
   3.Low power consumption
   4.Reduced number of transfer points
   5.Quick installation and quiet running

►Advantages

   1.Flexible transportation – can convey all kinds of bulk materials such as coal, ore, sand, fertilizer and grain in horizontal, oblique, vertical or other angle directions. 

   2.High tensile strength

   3.Increases belt capacity

   4.No spillage with steep angle conveying

   5.Decrease necessary conveyor footprint

   6.No transfer points- the belt are capable of turning at any angle right from feed hopper to discharge point

   7.Maximum utilization of space – able to convey material at angles up to 90 degree

   8.Decrease maintenance costs with fewer drive units and components

   9.Long lifespan

   10.Low power requirement – requiring low power to move loaded belts

   11.Quiet smooth running – as belt runs on rotating idlers, low resistance is achieved that in turn ensures quieter operations.

If you want to have a try, please contact me as soon as possible! I believe it will bring your production great changes and I will always be here to help you!

Skype:wang.betty13

E-mail:kewang808@gmail.com

Phone:+8615836038961

We can also provide belt conveyor, vibrating screen and other mining machines, if you want to know more, info@http://www.pkmachinery.com

Lightweight Continuous Conveying Equipment-Portable Belt Conveyor

Lightweight Continuous Conveying Equipment-Portable Belt Conveyor

Do you want to own a kind of lightweight continuous conveying equipment which has the features of high efficiency, good mobility, and convenient usage? Here comes such a equipment that suits you, it is our Portable Belt Conveyor!

It can be used in port, jetty, mining, warehouse, and construction site for moving bagged cargo and bulk materials.
      Movable belt conveyor is divided into rise-and-fall and non rise-and-fall conveyors.

      It is a kind of machinery that can transfer the material continuously by friction drive.

      According to different transport requirements, the transport system can be single belt conveyor or consist of several conveyors or be combined with other conveying equipments.

      It can be installed horizontally or aslant to meet the needs of different production lines. 

►Features
    1.Lightweight
    2.Two-way transporting 
    3.Easy operation 
    4.Widely used
    5.Easily  move 

►Advantages 

    1.High precision, high loading capacity with hard mask gear(2 to 3 times more than soft mask gear)

    2.Long service life ( reach 10 years)

    3.Compact construction and small floor space (reduce above 50%)

    4.Light weight and small volume (reduce 50%)

    5.Specially vertical driving construction, more used in mining delivery machinery under coal mine well. 

Hurry up and see it, you will have a big surprise! We can also provide bucket elevator, vibrating screen and so on, if you have any interests, please let us know!

Skype: wang.betty13

E-mail:kewang808@gmail.com

I am always here to help you! Hurry up!