Lightweight Continuous Conveying Equipment-Portable Belt Conveyor

Lightweight Continuous Conveying Equipment-Portable Belt Conveyor

Do you want to own a kind of lightweight continuous conveying equipment which has the features of high efficiency, good mobility, and convenient usage? Here comes such a equipment that suits you, it is our Portable Belt Conveyor!

It can be used in port, jetty, mining, warehouse, and construction site for moving bagged cargo and bulk materials.
      Movable belt conveyor is divided into rise-and-fall and non rise-and-fall conveyors.

      It is a kind of machinery that can transfer the material continuously by friction drive.

      According to different transport requirements, the transport system can be single belt conveyor or consist of several conveyors or be combined with other conveying equipments.

      It can be installed horizontally or aslant to meet the needs of different production lines. 

►Features
    1.Lightweight
    2.Two-way transporting 
    3.Easy operation 
    4.Widely used
    5.Easily  move 

►Advantages 

    1.High precision, high loading capacity with hard mask gear(2 to 3 times more than soft mask gear)

    2.Long service life ( reach 10 years)

    3.Compact construction and small floor space (reduce above 50%)

    4.Light weight and small volume (reduce 50%)

    5.Specially vertical driving construction, more used in mining delivery machinery under coal mine well. 

Hurry up and see it, you will have a big surprise! We can also provide bucket elevator, vibrating screen and so on, if you have any interests, please let us know!

Skype: wang.betty13

E-mail:kewang808@gmail.com

I am always here to help you! Hurry up! 

Type Introduction and Maintenance of Conveyor Belt Rollers

1.Trough rollers
The standard tough angle of trough roller is 35 degrees, so most of conveyors use 35 degrees trough rollers and 35 degrees trough bend forward rollers.

添加图片说明

2.Impact rollers
Impact roller angle includes 35 and 45 degrees, when using the canvas conveyor belt, only the 35 degrees tough impact roller can be selected. groove rollers. 45 degrees trough impact roller can be used in the section where the guide chute will not be affected by material impact .

添加图片说明

3.Transition rollers
Transition roller is used for belt conveyor with large capacity, long distance and large conveyor belt tension.
4.Return rollers
Return roller is also called below parallel roller, it is also the most used one kind of the roller.

添加图片说明

5.Self-aligning rollers
Self-aligning roller includes ordinary self-aligning roller, friction self-aligning roller and tapered self-aligning roller. cone-shape self-aligning roller. Self-aligning roller is applied to automatically correct excessive running deviation appeared in the process of operation to guarantee the normal work of belt conveyor.

添加图片说明

6.Maintenance
Since rollers occupies large quantity of belt conveyor parts, so for belt conveyor rollers, maintenance is particularly important. During the process of using, please keep the belt conveyor roller working in a dry environment, change the damaged roller in time and keep the roller surface clean.

添加图片说明

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation.

skype:wang.betty13

E-mail:kewang808@gmail.com

 

Shuttle Conveyor

Are you an owner of a farm? Have you felt very tired when having a big harvest? How do you put food into the granary? Here we will show you the shuttle conveyor, which is convenient and effective. 

It can be widely used to discharge material constantly in multi-point when the discharging points could move.So it could be used in agriculture, power plant, rawmaterial stocking, metallurgy industry, etc. 

Shuttle conveyor is designed for conveying material moves along a transport direction on the steel track which is usually installed on the top of the storehouse.Reversible conveyor mainly used to discharge material constantly in multi-point when the discharging points could move.

添加图片说明

► Advantages

    1.Multiple discharge point

    2.Discharge continuously in long distance

    3.Two way running and discharging

    4.Compact structure with low height

    5.Convenient installation and maintenance

If you need more information aboutit, please contact me at any time!

Skype:wang.betty13

E-mail:kewang808@gmail.com

website: http://www.pkmachinery.com

fixed belt conveyor transport raw material for cement

The introduction and application of tension device

   Belt conveyor is a transport machine that is driven by friction and it can transport materials continuously. Belt conveyor needs tension force in order to ensure the normal and stable operation of conveyor and meet the friction driving force between the driving drum and the belt. It is very important to choose the proper tension device when we design the belt conveyor.

Functions

1.Tension device can make the belt conveyor have enough initial tension force so that can ensure the necessary friction between belt and driving drum.It also can reserve friction to meet the requirements of friction drive of transmission drum.

2.Tension device can ensure the tension force of minimum tension point in order to satisfy the pendulous restriction conditions of conveying belt so that can make sure of the normal running of conveyor.

3.To provide the necessary route for conveyor belt joint.

Detailed rules and regulations of operational approaches

      When we turn off belt conveyor, the stored energy of conveying belt will release rapidly; and then it will damage its mechanical components and conveying belt itself, especially in the dip angle of belt conveyorand the tension device. When the belt conveyor brakes suddenly, the speed of driving drum will decrease rapidly and the linear displacement will less than the displacement of upstream drum. This characteristics will decrease the mechanical stress of upstream conveying belt and the deformation of belt will smaller, while the mechanical stress of downstream conveying belt will increase as well as deformation. That is to say,when the speed of transmission drum suddenly reduces, the returning conveying belt under the transmission drum caused by the mechanical stress of belt will be strained while returning conveying belt and upward conveying belt below the transmission drum will be relaxed because of the inertia of mechanical equipment. Thus, tension device of conveying belt should pay much attention to its deformation and brake the displacement of upstream position.

How to deal with the feed casting of belt conveyor

  It is a common problem that belt conveyor will appear the phenomenon of feed casting.And the reason is multi-aspect.The most important thing is that we should emphasis on its maintenance in daily life.

    1.Feed casting in the transferring point.This kind of situation will be happened in the hopper and guide chute.If belt conveyor is overload,it will result in the damage of keep-off rubber apron board. We can slove this promble by controling the conveying capacity and strengthening the maintenance.

    2.There is feed casting when concave section of belt conveyor suspends in midair.The reason why concave section of belt conveyor suspends isthat curvature radius is smaller. At this time, the situation that beltconveyor becomes groove will change. Because belt has departured trough roller unit, the groove angle becomes smaller that will result in the phenomenon of feed casting. Therefore, we should adopt the larger curvature radius as far as possible in the design stage to avoid happening this kind of situation. 

    3.When the belt is off tracking, it will appear the phenomenon of feed casting.The reason is that the height of two edges changes when the belt is running.Thus,one side of belt is high while the other is low. And the n the material will drop out from the lower side. We can adjust the belt running deviation to solve it.

Fore more information,please contact us.

• Tel: +86 373 579 9198
• Fax: +86 373 507 1699
• info@pkmachinery.com
• Address: 289 Yellow River Road, Xinxiang City, Henan Province, China

inclined soda ash scraper conveyor for Pakistan

Two-way Pull Cord Switch of Belt Conveyor Protection Devices

The two-way cord switch adopts the world’s leading dual bearing transmission structure in order to avoid the friction exists on drive shaft directly when the s pull cord switch is switched on, causing the increasing gap, improper seal or stuck phenomenon, which will prolong the life-span of pull cord switch. Precise painting applied on the surface of two-way pull cord switch of belt conveyor protection devices which is not easily to fall off. The driving shaft is made of stainless steel material with high intensity, the surface of shaft is smooth. The lever is made precisely to avoid the welding. Besides, the bronze cushion is built internally which makes smooth surface of lever and higher intensity. This product has several advantages, which are longer life-span, flexible, practical ,safe and reliable operation, easier maintenance and so on.